| قائمة الموقع |
 |
| بالأرقام.... |
|
 |
|
|
عدد صور الموقع: 2889
عدد أقسام الموقع: 109
عدد الـVotes الكلي: 7652
عدد التعليقات الكلي: 11
عدد الـHits الكلي: 2225440
عدد مرات التحميل: 445484
المتواجدين حاليا: 16
عدد الزوار الكلي:
|
|
|
| |
| أختر لغتك المفضلة |
|
| الإعلانات |
|
|
|
|
|
75-78 combo |
|
 |
|
|
|
Combo 75.
Combo 75 uses the same block as Combo 74, but Trick Flow street heads and a bigger cam is used. The heads are not the Twisted Wedge versions from Trick Flow, but heads that are designed as direct factory replacements. To help the heads flow better, a more aggressive camshaft is also used. The upgrade increases the power by 43 HP and the torque by 31 ft-lbs. With this cam and heads, the torque peak occurs at a more normal 79% of the HP peak. |
|
|
Displacement: |
355 cu. in. |
|
Carburetor: |
Demon Speed Demon 750 |
|
Heads: |
Trick Flow 23° Street Heads, with 2.02/1.60 in. valves and 195 cc intake runners |
|
Intake: |
Edelbrock Performer RPM |
|
Camshaft: |
Comp Cams 286 Magnum hydraulic, with 286° of duration, 236° of duration @ 0.050 in. of lift and 0.490 in. of lift. |
|
Exhaust: |
Hooker Super Competition headers with Flowmaster 3 in., 3-chamber mufflers |
|
Pistons: |
Federal-Mogul forged aluminum |
|
Rods: |
stock |
|
Crank: |
cast |
|
Comp. Ratio: |
9.4:1 |
|
MAX HP: |
423 @ 6200 |
|
MAX Torque: |
417 @ 4900 |
|
|
Combo 76.
Combo 76 comes from pages 125-130 of the July 2000 issue of Super Chevy. It uses all-Edelbrock components with 8.5:1 compression to make 310 HP and 378 ft-lbs of torque. |
|
|
Displacement: |
350 cu. in. |
|
Carburetor: |
Edelbrock Performer 600 |
|
Heads: |
Edelbrock Performer, with 2.02/1.60 in. valves and a 3-angle valve job |
|
Intake: |
Edelbrock Performer |
|
Camshaft: |
Edelbrock hydraulic, with 204/214° of duration @ 0.050 in. of lift, and 0.420/0.442 in. of lift. |
|
Exhaust: |
shorty 1 5/8 in. headers and dual pipes |
|
Comp. Ratio: |
8.5:1 |
|
MAX HP: |
310 @ 5000 |
|
MAX Torque: |
378 @ 4000 |
|
|
Combo 77.
Combo 77 comes from pages 64-67 of the April 1991 issue of Chevy High Performance.
Combo 77 uses a 350 cu. in. engine with reworked GM #186 heads and a Comp Cams 268° camshaft. The source states that the camshaft has 0.474 in. of lift—however, the Comp Cams High Energy 268° cam only has 0.454 in. of lift, and the Comp Cams Xtreme Energy 268° cam has 0.477 in. of lift. Perhaps Comp Cams used to offer this version back in '91. Anyhow, this combination makes 383 HP and 404 ft-lbs of torque. |
|
|
Displacement: |
355 cu. in. |
|
Carburetor: |
Holley 650 |
|
Heads: |
GM #186, with 2.02/1.60 in. valves, reworked 160 cc intake runners, and bowl blending |
|
Intake: |
Edelbrock Victor Jr. |
|
Camshaft: |
Comp Cams 268, with 268° of duration and 0.474 in. of lift |
|
Rockers: |
Comp Cams 1.6:1 Magnum roller |
|
Exhaust: |
1 3/4 in. headers, a crossover pipe, and Cyclone Sonic turbo mufflers |
|
Pistons: |
Sealed Power forged |
|
Rods: |
stock |
|
Crank: |
cast |
|
Timing: |
34° |
|
Comp. Ratio: |
10.5:1 |
|
MAX HP: |
383 @ 5250 |
|
MAX Torque: |
404 @ 4100 |
|
|
Combo 78.
Combo 78 comes from pages 65-68 of the April 2001 issue of Chevy High Performance.
GM Vortec cylinder heads are used with a Comp Cams Xtreme Energy 262° camshaft to produce 390 HP and 426 ft-lbs of torque. These numbers are made with 87 octane, while most of the combos on my site used 92 or 93 octane gasoline. Again, I am not sure how much of a power difference the lower octane makes. |
|
|
Displacement: |
355 cu. in. |
|
Carburetor: |
Demon Road Demon 625 |
|
Heads: |
GM L31 Vortecs, with 1.94/1.50 in. valves |
|
Intake: |
Edelbrock Performer RPM Vortec |
|
Camshaft: |
Comp Cams Xtreme Energy 268° hydraulic, with 268/280° of duration, 224/230° of duration @ 0.050 in. of lift and 0.477/0.480 in. of lift.(Corrected valve lift with 1.6:1 rockers is 0.508/0.512 in.) |
|
Rockers: |
Comp Cams roller, 1.6:1 |
|
Headers: |
Hedman Elite 1 5/8 in. |
|
Pistons: |
Speed Pro dished |
|
Rods: |
stock |
|
Crank: |
Scat |
|
Distributor: |
Pertronix HEI |
|
Timing: |
36° |
|
Comp. Ratio: |
8.75:1 |
|
MAX HP: |
390 @ 6000 |
|
MAX Torque: |
426 @ 4000 |
|
|
|
|
| |
|
|
|
|
|
