775HP turbosystem

turbotechnologyinc


LS1  SYSTEM

ls1race_b.jpg (20067 bytes)
LS1  SYSTEM WITH 80MM TURBO SHOWN

LS1  Kit
 

TTI Stainless short tube mandrel bent headers / CNC cut header flanges / Stainless V band flange connections
2.5" stainless crossover pipe / 2.5 Stainless turbo feed pipe with waste gate mount / 3.00" to 3.50" mandrel bent down pipe / Turbocharger from 60 to 80 mm ( choice of Turbonetics or Innovative ) / Turbonetics Race gate / 3.00" aluminized compressor outlet ducting / 4.00" inlet ducting / K&N filter / Silicone hose couplers with stainless hose clamps / Precision PT-900 air to water intercooler / Radiator with electric fans ( intercooler ) / Water reservoir and water pump ( Intercooler ) / Gravity flow oil drain with CNC cut flanges / All necessary hardware, fitting, & gaskets.

This turbo system is designed for the high horsepower enthusiast. A forged bottom end is needed along with a good set of cylinder heads. In early testing we developed over 850 rwhp with just 17 psi of boost.  We have had customer’s tune  800 rwhp with Ls1 edit and the HP Tuners 2/3 bar setup.

The air conditioning must be removed or relocated by the customer.
An after market fuel system is also needed.
We are Accell distributors, so we can set you up with injectors or D.F.I.
We also work in con-junction with some of the country's foremost experts with LS1 edit.

 

*SYSTEM IS NOW AVAILABLE FOR ORDERING*

THIS SYSTEM WAS DESIGNED ON A T/A
IT WILL FIT THE FIREBIRD / TRANS AM 98- TO PRESENT

16 psi
775hpa.jpg (30997 bytes)

THESE FIGURES ARE LIMITED DUE TO ENGINE / CRANKSHAFT STRENGTH
THE TURBO CHARGER AND SYSTEMS CAPABILITY ARE IN THE 20+
BOOST RANGE AND 900 HORSEPOWER TO THE WHEEL RANGE

CALL FOR SYSTEM PRICES / OPTIONS

 

ls1hdrkit.jpg (37954 bytes)
This is the "hot side" pipes. They are all made out of 304 stainless. They include the
(2) header pipes , turbo mount pipe , and downpipe with flanges. There is also a
larger 3.5" downpipe available as well. This set-up is also available by itself.
Call for pricing. Larger 3.5" downpipe is extra

Mighty Mouse 1st Turbo GM Feature Car! 

 

http://www.turbotechnologyinc.com/ls1_race_turbocharger_system.htm

ÑÇÈØ ÇáÕÝÍÉ : http://www.racing4e.com/articles97.html